CarCoverUSA, Inc.
Shopping Cart
Order Status: Check My Order
Home
Print
 
Coverking CoverkingCarCovers.com
E-Mail: sales@carcoverusa.com
 

Coverking Car Covers 

Cleaning Instruction:
Machine Cleaning
Autobody Armor Car Covers can be easily cleaned by the use of large-sized automatic speed control washers ( M/Cs). However, agitators are not recommended to be used in the cleaning process as the use of agitators might yield adverse effects by tearing off the products.
You are altogether not instructed to use small M/Cs for cleaning purposes as in small M/Cs, the space meant for washing is small and as such it is not likely to provide smooth fabric movement.
Hand Washing:
Hand washing is also a proper procedure of cleaning Autobody Armor Car Covers that you can apply if the cover is not dirty to a higher degree. Hand washing is done slowly and gradually by washing the Autobody Armor Car Cover with your hands.
Another Washing Procedure
You can also place the internal side of the Autobody Armor Car Cover out on your car and clean it by spraying water with the help of a hose. However, this cleaning procedure is particularly applicable if there is no external antenna.
Important Cleaning Instructions:
For the purpose of washing your Autobody Armor Car Covers, you can use a suitable non-toxic, non-caustic, bio-degradable and environment friendly anionic laundry detergent. Two cups of this liquid cleaner is mixed with cold or warm water and thereafter the cover is soaked for 5 minutes in order to loosen the dirt particles embedded in it. After that, you are required to wash the cover for five minutes with gently cycles. For proper cleaning, initiate a two cycle rinsing of the cover with cold water and thereafter you are again required to rinse the cover one cycle on order to make it half dry. As drying is completed for half of the cover, you can put the half-dried cover on the vehicle and wait for it to dry completely by the affect of air.
This washing process is to be undertaken at 20-27 degree centigrade and in this procedure; the cover washing is completed in two rinse cycles. Also, in this process, don’t use any automatic dryer and do not also attempt to dry clean your Autobody Armor Car Cover.
 

Coverking Car Cover



Cleaning Instruction:
The Coverbond-4 Car Cover cleaning process includes two principal procedures: hand washing and machine cleaning. Altogether, the Coverbond-4 Car Cover can be cleaned by bringing the inner out and spreading water on it by using a hose. Simple hand washing is applicable for Coverbond-4 Car Covers that are not considerably dirty and you can also use large-sized automatic speed control washers (M/Cs) for proper cleaning of your Coverbond-4 Car Covers. However, agitators are not recommended to be used in machine cleaning as the use of agitators can rip off the fabric of your Coverbond-4 Car Cover.
Coverbond-4 Car Cover Cleaning Process:
First of all, get hold of a non-caustic, bio-degradable, non-toxic and eco-friendly anionic detergent. Take two cups of this detergent, mix with warm/ cold water and then leave the Coverbond-4 Car Cover on it to soak for 5 minutes. Thereafter, wash the Coverbond-4 Car Cover with gentle cycles for a 5-minute period. Thereafter, rinse the Coverbond-4 Car Cover with two cycles and again rinse it with one cycle to make it half dry. Now, pick up the half-dried Coverbond-4 Car Cover and leave it over the vehicle to be dried completely by air effect.

Cleaning Instruction:
Mosom Plus Car Covers can be cleansed properly via hand washing and this process is generally applied to the Mosom Plus Car Covers that are not considerably dirty.
You can also use the machine cleaning procedure to cleanse your Mosom Plus Car Cover but for machine cleaning, you need to avail of large-sized M/Cs. These are automatic speed control washers that you can use to wash your car cover properly and for machine cleaning, don’t use small automatic speed control washers as the washing space is considerably small in small M/Cs. Alongside, agitators are not recommended for use as the use of agitators can unleash heavy damage to your car cover fabric.
Mosom Plus Car Cover Cleaning Process:
For proper cleaning of your Mosom Plus Car Cover, first of all, get hold of a non-caustic, non-toxic, bio-degradable and environment friendly anionic detergent. Take two cups of this detergent and mix with warm/cold water before soaking the Mosom Plus Car Cover on it for five minutes. Therefore, you are required to undertake rinsing of your Mosom Plus Car Cover for five minutes with gentle cycles and then rinse the car cover again with two cycles. Next, rinse the Mosom Plus Car Cover for one cycle, make it half dry and thereafter place it over your vehicle hood so that the affect of air makes it completely dry.

Cleaning Instruction:
Silverguard Car Cover is properly washable through hand washing as well as via machine use.
The hand washing process proves handy for Silverguard Car Covers that are not considerably dirty. You can clean the Silverguard Car Cover via simple hand wash.
Instead of cleaning your Silverguard Car Cover via hand washing, you can also spot clean your Silverguard Car Cover with the help of automatic speed control washers (M/Cs). Only large M/Cs would be practically useful for you as in small M/Cs, the washing space is considerably small. You should never use agitators in machine cleaning as the use of agitators is likely to rip apart and tear off your Silverguard Car Cover.
Altogether, it is also a significantly easy to start cleaning your car cover by bringing the inner cover out and then cleaning it by spraying water.
It is especially necessary to use a bio-degradable, non-caustic, non-toxic and eco- friendly anionic detergent for the purpose of washing your Silverguard Car Covers. For proper washing, you should take this liquid cleaner in two cups and mix it with warm or cold water before soaking the cover in it for a brief 5 minutes period to release the attached dirt particles. Thereafter, you can wash the Silverguard Car Cover with gentle cycles for a period of 5 minutes and as soon as it is completed, you can start a two cycle rinsing of your Silverguard Car Cover with cold water. Now, as you rinse the cover with one cycle, it is made half dry and after that as soon as you position the half dried cover over the vehicle, the affect of air makes your Silverguard Car Cover completely dry. The important fact to be noted with regard to this washing procedure is that it offers superb protection to the fabric finish of your car cover.
Important Note On The Cleaning Process:
It is to be noted that the cleaning process becomes successful only within the 20-27 degree centigrade temperature range.
Altogether, you should not use automatic dryer and also dry cleaning of your Silverguard Car Cover by any other means is also not recommended.

Cleaning Instruction:
1. Silverguard Plus Car Covers can be easily cleaned by using two procedures: by washing the car cover properly with your hands as well as by using automatic speed control washers ( M/Cs) for this purpose. The first cleaning process (hand washing) is applied to Silverguard Plus Car Covers that are not so dirty and this is achieved bit by bit by using both hands.
For machine cleaning, you are required to use huge automatic speed control washers (M/Cs) and small or medium-sized M/Cs are not to be opted for the purpose of washing your Silverguard Plus Car Covers as small washing space may yield difficulty in fabric movement. Altogether, you should not use agitators while washing your car covers in M/Cs as agitators might tear off your Silverguard Plus Car Covers.
2. Apart from using hands and machines to clean your Silverguard Plus Car Covers, you can opt for another simple cleaning process. You can place your car cover over your car, bring the inside out and then clean it by spraying water from a hose.
Important Pointers On Cleaning Instruction:
1. To cleanse your Silverguard Plus Car Covers properly, you need to opt for a non-caustic, non-toxic, eco-friendly and biodegradable anionic detergent. As you avail of this detergent, you need to mix two cups of it with cold/warm water and thereafter the Silverguard Plus Car Cover is to be soaked in the mixture for 5 minutes. Five minutes of soaking would release the dust particles attached to the cover and as soon as it is completed, the Silverguard Plus Car Cover is to be washed gently for 5 minutes. Then, you are required to rinse the cover with two cycles and again one cycle rinsing of the cover is required to half-dry your Silverguard Plus Car Cover. After half drying, the remaining portion of the cover would dry up automatically as soon as it is exposed to air.
2. Proper cleaning of your Silverguard Plus Car Covers is possible only at 20-27 degree centigrade. You are instructed not to use automatic dryer in the process and also not to dry clean your Silverguard Plus Car Covers.

Cleaning Instruction:
Your Stormproof Car Cover can be cleansed properly via hand washing as well as machine cleaning. The hand washing procedure is particularly applicable to Stormproof Car Covers that are not-so dirty and for machine cleansing; you should opt for large M/Cs (automatic speed control washers). Small M/Cs won’t work properly as the washing space is considerably small in small automatic speed control washers. However, you are instructed not to use agitators in machine washing as the use of agitators might tear away the fabric of your Stormproof Car Cover.
Stormproof Car Cover Cleaning Process:
For proper cleaning of your Stormproof Car Cover, you are required to obtain a non-toxic, bio-degradable, non-caustic and eco- friendly anionic detergent and it is to be mixed with warm or cold water. Mix two cups of this detergent with warm./cold water and then soak the Stormproof Car Cover in it for a brief 5 minutes. Thereafter, wash your soaked Stormproof Car Cover for 5 minutes with gentle cycles and then rinse the Stormproof Car Cover with two cycles. As the two cycle rinsing of your Stormproof Car Cover is completed, you can further rinse the car cover with one cycle and make it half dry. Now, as you position this half dried cover over the hood of your vehicle, it will dry completely by the affect of air.

Cleaning Instruction:
To clean your Stretch Satin Car Cover properly, you can undertake hand washing and also, it is possible to cleanse your Stretch Satin Car Cover through the machine cleaning process. Simple hand washing can be applied to Stretch Satin Car Covers that are not significantly dirty and for machine cleaning of your Stretch Satin Car Cover; you can opt for M/Cs. These M/Cs are automatic speed control washers and large M/Cs would be particularly suitable for the purpose of washing your Stretch Satin Car Cover as you may not be able to wash your car cover properly in small washing space. However, the use of agitators may seriously damage your car cover fabric and as such agitators are not recommended to be used in machine cleaning.
The Proper Cleaning Procedure:
Before starting off to clean your Stretch Satin Car Covers, you should remember that the cleaning process is successful only at 20-27 degree centigrade. Alongside, you are not recommended to use an automatic dryer in the process and altogether you should not attempt to dry clean by any other process.
The Stretch Satin Car Cover cleaning process includes the following steps:
First of all, you are instructed to opt for a non-caustic, non-toxic, bio-degradable and an environment friendly anionic detergent and mix this detergent with warm/cold water. You can take 2 cups of this detergent and mix it with warm and cold water and thereafter you can soak the cover in it for a brief 5 minutes to release the dust particles attached to your cover.
In the second step, you are required to undertake 5 minute washing of your Stretch Satin Car Cover with gentle cycles and then you can initiate a two cycle rinsing of your Stretch Satin Car Cover with cold water. As it is finished off, you are required to again initiate one cycle rinsing of the cover which would further make it half dry. As you’re Stretch Satin Car Cover is half dried, you can place it over your vehicle body and leave it to dry completely by the affect of air.

Cleaning Instruction:
You can cleanse the Triguard Car Cover by using your hands as well as through machine use and also, you can place the Triguard Car Cover over your vehicle, bring out the inner cover and cleanse it thoroughly by spraying water with the help of a hose. The hand cleaning procedure is generally used for car covers that are not significantly dirty. However, for machine cleaning, you can use M/Cs available in most of the commercial laundries. These are automatic speed control washers that you can use to clean your Triguard Car Cover and also keep in mind that you should use only large M/Cs as in small M/Cs, the washing space is also significantly small. Bear in mind that you are not recommended to use agitators in the cleaning process as the use of agitators can tear or rip off your Triguard Car Cover.
Triguard Car Cover Cleaning Process:
The cleaning procedure is a considerably easy process and to start off with it, you need a non-caustic, bio-degradable, non-toxic and eco-friendly anionic detergent. First of all, take two cups of this detergent and mix it with warm /cold water and thereafter soak the Triguard Car Cover on it for five minutes. Now, with gentle cycles, wash the Triguard Car Cover for a period of five minutes. Thereafter, you need to rinse the Triguard Car Cover with two cycles and then again one cycle rinsing becomes necessary. With this, your the Triguard Car Cover becomes half dry and now you can place it over your vehicle for complete drying.

Additional Info
Coverking Car Covers  -  Coverking Seat Covers  -  Coverking DashBoard Covers  -  Coverking Floor Mats
Coverking Car Cover Cleaning Instructions








TOP BRANDS
CarCoverUSA Brands